The use of higher flux density in the transformer design____________? - PakMcqs

Related Mcqs:

1. Hysteresis loss in a transformer varies as CBmax = maximum flux density) ?

   A. Bmax B. Bmax1-6 C. Bmax1-83 D. B max...

2. The path of a magnetic flux in a transformer should have______________?

   A. high resistance B. high reluctance C. low resistance D. low reluctance...

3. The value of flux involved m the e.m.f. equation of a transformer is____________?

   A. average value B. r.m.s. value C. maximum value D. instantaneous value...

4. The leakage flux in a transformer depends upon______________?

   A. load current B. load current and voltage C. load current, voltage and frequency D. load current, voltage, frequency and power factor...

5. The path of the magnetic flux in transformer should have____________?

   A. high reluctance B. low reactance C. high resistance D. low resistance...

6. The permissible flux density in case of cold rolled grain oriented steel is around__________?

   A. 1.7 Wb/m2 B. 2.7 Wb/m2 C. 3.7 Wb/m2 D. 4.7 Wb/m2...

7. Which of the following is the main advantage of an auto-transformer over a two winding transformer?

   A. Hysteresis losses are reduced B. Saving in winding material C. Copper losses are negligible D. Eddy losses are totally eliminated...

8. The changes in volume of transformer cooling oil due to variation of atmospheric temperature during day and night is taken care of by which part of transformer?

   A. Conservator B. Breather C. Bushings D. Buchholz relay...

9. A common method of cooling a power transformer is_______________?

   A. natural air cooling B. air blast cooling C. oil cooling D. any of the above...

10. The main reason for generation of harmonics in a transformer could be_______________?

    A. fluctuating load B. poor insulation C. mechanical vibrations D. saturation of core...